## Mixup Cube Algorithms

This puzzle was a curious one and I required a helpful tutorial to solve it. Just some quick algorithms to help me solve this cool cube.

**Step 1: Return to a cube**

First, you’ll get offset centers lined up with an edge piece sloped downward above it. Here, you move the center piece 45° to the right, then perform a R, U’, R’ before returning the center. You then keep repeating this process. If you’re stuck with a flipped edge, just bring it down to make it a center and repeat.

**Step 2: Restore centers**

Just prep centers. This will swap front and right centers. When you have a pair to exchange, move your center 45° to the right, then R2 and return. Super easy.

**Step 3: Solve F2L**

Solve the first two layers are you would on a normal 3×3.

**Step 4: Last-Layer Parities**

If you get the classic 4×4 parity, you can bring down your front edge 45° (an M slice). Then F2, an E (turn left as you look at it), F2, and return the E and return M’.

This will mess up three layer 2 edges which can be fixed easily apparently. Place the proper piece on bottom/back and whip out a: B2 M B2 M. This should fix it.

If you get a parity where your final two edges are swapped, place the flipped edge in front. A M’ here is a 45° upward.

M’, R, U, R’, U’

M’, U, R, U’, R’

I’m finding a problem where this doesn’t necessarily solve it all. But for now, it’s a good start. Perhaps I’ll edit this again in the future.