slateblog

I grabbed this little guy while in New York and, it being a Skewb variation, I quickly ran into troubles. Not quire sure what’s up with these friggin’ things, but my brain breaks a little bit, particularly this dumb dodecahedron. It didn’t help that after getting a few steps in, I kept getting confused by orientation and the tutorials out there leave a bit to be desired. Not knocking their content – but they’re not too organized. Anyhow, here’s my solution, which will likely require some tweaking before I forget how it’s all done. That’s kinda silly though, as it only really requires the same one algorithm all Skewbs need. R’, L, R, L’. You can reverse it (L, R’, L’, R) for step 2.

Step 1: Solve an X
This isn’t so bad, though sometimes moving an item out of the way takes a second. This should really be intuitive, but worst case, you might have the piece in the correct spot but not oriented.

If so, move it up to the opposite side. If moved to the right, rotate counter-clockwise, if on the left, CW. Then bring it down and fix the initial turn. Note, if the color you want is facing up when starting this, you’ll have to do this step twice. You can situate all four without breaking one another. This is the easiest step and even if you mess it up, it’s easy enough to fix before moving to step 2.

Step 2: Position remaining centers
This will swap the top and front centers as well as the left and the right. You’re going to use the X you’ve just solved as a starting point for the bottom layer: hold that with your thumb on the bottom. As these centers can have a vertical or horizontal black line (between stickers), it’s easy to get the orientation messed up. However, just keep that thumb on the bottom X as a starting point.

Now, if you’re smart enough, you can plan this out. I, on the other hand, just keep bringing the top piece down to its correct spot (and messing up the rest in the process) until everything is right. Don’t worry about orientation – just getting them in the right spot. You’ll know which algorithm to use based on its upper-level orientation. If the piece you need is on the left face, start with a R’ to bring it to its position. If on the right, start with L. This takes a few tries, but it’s easy.

Step 3: Orient top-layer X
Still using your bottom facing down, you now have 4 corners correctly positioned and oriented and now your goal is the remaining 4. This can be a pain. Figure out the top-layer colors (here they’re pink and green) and you want there to be two on one face. In this photo these stickers are close, but it could be on the other side where they are farther apart. (Close = they’re adjacent to a horizontal face, far is if they’re adjacent to a vertical face) These can be any combination of those colors too. G,G/P,P or how it is here, one of each. You’ll put these on the left side and rotate the puzzle clockwise (if looking from the right) so that the bottom piece (thumb still on it!) is now the crossroads for this algorigm.
Doubled algorithm this time: R’, L, R, L’ (x2).

If you have no doubles, which is likely, find one sticker you want. If it’s on the left, start with the R’ version of the algorithm and vice versa. I believe this should consistently give you a usable pair.

Step 4: Orient remaining centers
The very same algorithm will be used to rotate centers. This will flip four centers: U, F, L and R. If you only have two, you’ll be doing this algorithm twice – by fixing one and breaking three others (3+1=4).

Get the four centers U, F, L and R as mentioned and rotate up slightly. You will be performing this algorithm on a properly-oriented side as shown here. Make sure the top and front centers are part of the algorithm (sometimes I do this and my F layer is on the bottom – ensure that it’s part of your algorithm!) Do the same algorithm 6x. Every so often you will have four mis-oriented centers in a row and not a plus pattern. Despite having four, your goal, you still have to perform this step repeatedly. Use your intuition to figure out which to fix so to prep yourself for a proper final step.

Good luck!

When I first moved to Sweden, I purchased the new flat-edged Master Pyraminx. The puzzle looks great and I solved it a number of times. Then, I forgot how.

It’s strange; I can still solve the rest of my puzzles, or at least I think I can. In recent months, I’ve returned to the puzzle each time frustrated by my lack of memory and the unclear tutorials online. Today I checked again and hobbled together a solution. As always, for my own purposes, here are the steps I used to finally remember this solve!

Step 1: Solve One Face

Well, of course, get tips matching their adjacent sides first and get all three corners properly aligned. Then, pick one face to solve. This requires some intuitive positioning but it shouldn’t prove too difficult. Get those three center edges and then fill in the remaining six middle-edge pieces.

Step 2: Flip Middle Edges

Sometimes you’ll have all these middle pieces placed correctly. If not, however, two will be placed correctly, but oriented in reverse. In this case, move the correct piece to the back. Then you perform this algorithm, using intuition for replacing the bottom layer.

LD, RD, LU, RU
U’, L’, U, L

Step 3: Finish Second Layer

Here we bring the red piece down, not vice versa. Again we break the bottom layer, but that’s OK, it’s easy to fix! Of course, you can figure out the opposite if mirrored, so use intuition when figuring out what goes where here.

l, R’, l’, R’
Then get the U out of the way (u’)
L’, u, L, u’

Step 4: Centers

There are three possibilities here. Centers are all solved, none are solved or three are out of place. You could solve centers earlier or at the end, but if you have three centers misplaced, the algorithm will make you repeat the final step, so here’s a good time to do this algorithm.

To solve four centers, place opposite centers on top and bottom. It should be an easy one here:

LD, RD, LU, RU (x3).

As I mentioned, when three centers are out, it messes with things. This is sometimes referred to as parity. For this case, place the one properly-placed center on the left side and do the following:

R, U, R’, U (x2).

If this doesn’t swap your centers correctly, do it again. Done!

Step 5: Last-Layer Edges

All that should should remain are last-layer edges. Either these are solved or they need to be permuted. These could go clockwise or counter-clockwise. The algorithm here works opposite of that rotation. But it’s easy enough and can be done twice to accomplish the same result.

R, U, R’, U, R, U

Change that to U’ for a clockwise last-layer spin.